Virtual Thermal Printer 1.9.2

The printer offers efficient receipt printing capabilities for POS applications that utilize ESC/POS over IP. Upon powering on the device, users simply need to configure the IP address and port as indicated in their corresponding POS application.

The printer supports a variety of ESC/POS commands to enhance functionality:

• ESC @: Initialize printer
• LF: Print and line feed
• GS !: Double-width and double-height text
• ESC E: Toggle emphasized mode on/off
• ESC -: Toggle underline mode on/off
• ESC a: Align text (left, right, and center)
• ESC i and ESC m: Partial cut
• GS B: Toggle white/black reverse print mode on/off
• GS V: Cut paper
• GS k: Print barcode (EAN8, EAN13, Code39)
• GS ( k: Print QR Code; functions 169 & 180
• DLE EOT: Check printer status (1..4)
• GS v 0: Print raster bit image

For comprehensive information on ESC/POS commands, please refer to the following resource: Epson ESC/POS Reference.

This printer supports various code pages, allowing for diverse character set usage:

• CP437: US ASCII
• CP850: Latin I
• CP852: Latin II
• CP858: Latin I + Euro
• CP860: Portuguese
• CP863: Canadian-French
• CP865: Nordic
• CP866: Russian

Please note that the content displayed in the accompanying screenshots is for illustrative purposes only. The final output may vary based on the specific POS system in use. Users are advised to ensure that their POS application supports ESC/POS commands prior to installation.